Assemble VeggyTables
Assembly of a VeggyTable is very simple. You will need an allen key 5.5 mm and either a 13 mm or an adjustable spanner.
1. Place the table top upside down on the ground
Or
1. Place the top section right way up across a table (or other object of enough height)
2. Slide first leg down and the push all 3 bolts through side walls and leg
3. Repeat for all remaining legs
4. This step is easier with an assistant! pick up table and turn upright. Dont worry if a couple of bolts fall out
5. Replace any bolts that fell out!
6. Start to add washers and nuts, the nuts will screw on by hand until the nylon insert bites
7. Tighten nuts with a 5.5 mm hex allen key and a 13mm (or adjustable) spanner
8. Dont over tighten, just until head of bolt is flush with Cedar
How much does a VeggyTable cost?
The Classic VeggyTable costs £245.00
Contact
VeggyTables
The Workshop
Upcott
Braunton
Devon EX33 1HT
Tel: 01271 817533
Mob: 07967 326552
sales@veggytables.co.uk
Join our newsletter
Website by: www.thatsthewebsitesorted.co.uk